Flame Photometer

Product Details:

Enables speedy and accurate estimation of minute quantities of Sodium (Na), Potassium (K) Calcium (Ca) and lithium (Li). Based on a very simple process, this instrument eliminates the difficult and laborious process involved in classical chemical methods.

Analytical laboratories in the following fields would find it a great use:

• Agriculture
• Fertilizer
• Food
• Water Analysis
• Cement
• Geology
• Ceramics
• Metallurgy
• Plastics
• Oil refining

Principle:

• The solution under analysis is sprayed as a fine mist into a non-luminous flame which becomes colored according to the characteristic emission of the metal. Wavelengths, corresponding to the element being analyzed are selected by a narrow band optical filter and are allowed to fall on a photo detector, whose output is a measure of the concentration of the element. The output of the photo detector is connected to Digital Display to provide the read-out.

System:

• The total system consists of Main unit and Compressor unit. The main unit of the flame photometer, consists of an atomizer, mixing chamber, burner, optical lens, filters, photo detector and digital display. Compressor unit consists of control valve, pressure indicator & Air filter to Provide Moisture free; Oil free Air

Product Details:

Flame Photometer 128 is a micro-controller based instrument designed to provide automation in operation, measurements, and end-result presentation. It does the estimation of Sodium (Na), Potassium (K), Lithium (Li), and Calcium (Ca) in single aspiration of a sample.

For user's convenience, the instrument offers two measuring modes:

• Low Concentration
• High Concentration

There is the facility of curve fining correction for non-linear emission characteristics of an element, at higher concentration, store (save) setup for frequently used, measurement and the same can be recalled whenever required with a press of a button. Also, re-standardization using the single standard to minimize the effect of any unforeseen drift without going for the full recalibration. 4 Line 20-character LCD readout provides easy user interface & presentation of results. A Centronics printer port provides the print out of results on EPSON compatible Dot Matrix Printer, Printer is optional.

Features:

• Micro-controller based automation for ease of operation
• Determination up to four elements with single aspiration (Na, K, Li and Ca)
• Curve Fitting Correction for non-linear emission characteristics of an element at higher concentration, maximum five-point Calibration
• Storing facility for setups and results (date wise & batch wise, maximum 700 results), the same can be recalled whenever the need arise
• 4 Line 20-character LCD readout
• Facility for re-standardization with the single standard
• The multi-standard graph in dot matrix printout
• Built-in real-time clock for data and time of analysis
• Centronics printer port provided for print out of results (simultaneous with analysis or recalled) on EPSON compatible Dot Matrix Printer
• Printout facility tor invaluable sample, oaten sample, total clays samples or entire results in the memory (700 max.)
• Air compressor with built-in air regulator and air filter (SYSTRONICS -126)
• PC Link software for transferring data to computer & manipulation of data in computer using RS-232.